DECORATIVE PLASTER
It is a final coat facade lining used on concrete, plaster etc surfaces over poly urethane foams, polystyrene foams, insulation and/or other similar materials in plaster applications, reinforced by special chemicals with polymer fortification, highly cohesive, with no shrinkage or cracking, UV resistant ,with high strength and is water proof.
PRODUCT PROPERTIES
Color : White
Appearance : Powder
Density : 1.45 kg/lt
Application Time :Min.30min
Working Time : 3 hr.(20 C)
Bonding Strength :>0.75 N/mm2
Application Temperature :Min.+5C
Application Thickness : Max.6mm
FIELDS OF APPLICATION
Dekoser is used as final coat plaster mix on polystyrene foam polyurethane foam insulation materials and other products.
METHOD OF APPLICATION
DEKOSER in powder form in packages of 25kg is mixed with 4.5kg clean water without lumping. Afterwards, this mixture is dwelled for 10-15min.to allow chemicals to dissolve. The mixtures must be consumed within 3 hours and no water or powder must be added to the set mix after this period. Before application, the surface must be cleaned and must be free from material residues that may prevent bonding. Areas that are deformed on the surface must be repaired or correct using. REMĘKS 5-REMĘKS 10 for repair; and LATHER SV for undercoat defects.
DEKOSER is applied by steel trowel. Smoothening must be done by plastic trowel. No application must be made below +5C and over +30 C No application must be made in highly humid or hot weather under the sun.
APPLICATION AMOUNT
1mm 2-4 kg/m2
2mm 4-6 kg/m2
3mm 6-8 kg/m2
PACKING
25 kg Kraft bag
STORAGE
The product must be kept in a cool and dry environment. Shelf life is 1 year under suitable conditions. Product must not bestacked more than 8 rows high.
SAFETY MEASURES
DEKOSER is an irritant. Therefore contact with eye or skin must be avoided. Use of protective goggles and gloves during application is recommended. Contact areas must be washed with ample water in case of contact with eye or skin.