Acrylic copolymer based, reinforced with synthetic pigments and special fillers, non contracting and non cracking, UV resistant and with high water repellency (insulation) property, silicon based, ready to use final layer exterior front face covering used as material at front face covering of buildings, on surfaces such as concrete and plaster and over Polystyrene, polyurethane foams, insulation and similar products.
PRODUCT’S PROPERTIES
Color : Various colors
Appearance : Paste consistence
Application temp : Min. +5 oC
Leveling period : 10-15min.plastic
Trowel
Application method: Stainless steel
Trowel
Cleaning : With water when wet
APPLICATION AREAS
Used as final layer covering mortar at front face of buildings, on concrete and plaster surfaces, over Polystyrene, polyurethane foam, insulation materials etc products.
APPLICATION METHOD
Before application surface should be cleaned and removed of any material residues that might prevent adhesion. Defected areas on the surface should be repaired with REMIKS 5 – REMIKS 10 repair mortar. Under plaster defects should be corrected with LATHER SV. If the surface is painted then paint should be cleaned off the whole surface.
AKROSER is applied with help of stainless steel trowel. Leveling should be made with a plastic trowel within 10 – 15 minutes. Application should not be carried out “under +5OC and above +30OC” weather conditions. Application should not be made in humid or very hot weather under direct sun light. Band should be used so that the joints are even. Akroser 100 – 200 is not diluted however at applications left for long periods and carried out in very hot weather a little amount of water (0,5lt / 25kg) can be added. Akroser 100/200 is mixed in its container with help of mechanic drill.
USAGE QUANTITY
AKROSER 100 2 – 3 kg/m2
AKROSER 200 4 – 5 kg/m2
PACKING
25 Kg Plastic buckets
STORAGE
Product should be kept in dry and cool place. Shelf life under suitable conditions is 1 year. Stacking should not exceed 3 rows on top of each other. Protect from frost.