PRİMER T is a mixture ready to use, non soaping,  resistant to alkali and with a strong binding power.

PRODUCT’S PROPERTIES

Appearance                           : White liquid

Density                                 : 1 kg/lt

Flammability temp               : none

Basis                                   : Acrylic copolymer

Drying period                      : 6 – 24 hours

Environment temp   : > + 5 C

APPLICATION AREAS

 PRİMER T  is used as pre application agent at porous concrete, fibrous plates, absorbent and dusty surfaces, insulation prime coating of water, grease stains on lime plasters and similar; prevention of bleeding at application areas; also for adhesion of ceramic, wall and floor tiles to plaster or similar areas.

METHOD OF APPLICATION

Surface should be cleared from movable parts, materials such as grease, paint, dust etc. If there are any large cracks on surface they should be repaired with REMIKS – 5 repair mortar.

On surfaces where pre operation is complete PRIMER T is to be applied directly, in case floor is very absorbent process has to be applied two times. PRIMER T should be applied with a roll, fine brush or spraying method by spreading forcefully and evenly over the entire surface. In environments where rain is expected or under rain application should not be carried out before it is dry.

 USAGE QUANTITY

Depending on smoothness of surface and application thickness it is 150-200 Gr/m² at each layer.

PACKING

20 Kg Plastic barrel

STORAGE