PRODUCT DESCRIPTION
THICK FUGA is an easy to use special joint filler which has been strengthened with chemicals, has a balanced aggregrate and has been developed for joints with wide gaps.
PRODUCT’S PROPERTIES
Color : White
Appearance : Powder
Density : 1.30 kg/lt
Applicability time : 1-2 hours
Applicable temp. :Min +5 ºC
Setting time : appr. 24 hours
Joint thickness : 3-12 mm
APPLICATION AREAS
THÝCK FUGA is used to fill the joint gaps of materials which often come into contact with water such as ceramics, tiles, mosaic tiling, glass, bricks, decorative brickwork, floor bricks, natural stone, granite, etc. in areas such as bathrooms, kitchens, toilets and corridors.
METHOD OF APPLICATION
Surfaces to be filled must be clean, then wiped with a wet sponge and the filler should be fed into the joint with a soft spatula. The surface should be smoothed over with the help of a rubber trowel. Once the applied filler has sufficiently set, the excess should be wiped away from the ceramic with a cloth. In order to apply joint filler 24 hours should pass for horizontal surfaces and 48 hours for vertical surfaces.
THICK FUGA is available in 20 kg powder form and should be mixed with 5.5-6 kg of
clean water taking care to avoid lumps forming. Then the mixture should be left alone for 10-15 minutes to allow the chemicals to dissolve. The mixture should be used up within 2 hours, after this period no more water or powder should be added to the set mortar. If an interval occurs during application, the mixture should be mixed again before resuming work. Only an amount sufficient for 2 hours use should be prepared.
Nearly 1 kg/m2
20 Kg Craft Bag
Product should be kept in dry and cool place. Shelf life under suitable conditions is 1 year. Stacking should not exceed 8 rows on top of each other.