PRODUCT DESCRIPTION

COLOR FUGA is a joint filler which is easy to use, is reinforced with chemicals and contains special additives.

PRODUCT’S PROPERTIES

Color                         : Pink, Grey, Beige, Blue, Green, Brick

Appearance            : Powder

Density                   : 1.25 kg/lt

Applicability time    : 1-2 hours

Applicable temp.    :Min +5 ºC

Setting time           : appr. 24 hours

Joint thickness      : 0-3 mm

APPLICATION AREAS

COLOR FUGA is used for fill the joint gaps  of materials which often come into contact with water such as tiles, ceramics, mosaic tiling, etc. in areas such as bathrooms, kitchens, toilets and corridors.

METHOD OF APPLICATION

Surfaces to be filled must be clean, then wiped with a wet sponge and the filler should be fed into the joint with a soft spatula. The surface should be smoothed over with the help of a rubber trowel. Once the applied filler has sufficiently set, the excess should be wiped away from the ceramic with a cloth. In order to apply joint filler 24 hours should pass for horizontal surfaces and 48 hours for vertical surfaces.

 COLOR FUGA is available in 20 kg powder form and should be mixed with 5.5-6 kg of

clean water taking care to avoid lumps forming. Then the mixture should be left alone for 10-15 minutes to allow the chemicals to dissolve. The mixture should be used up within 2 hours, after this period no more water or powder should be added to the set mortar. If an interval occurs during application, the mixture should be mixed again before resuming work. Only an amount sufficient for 2 hours use should be prepared.

USAGE QUANTITY

0.6 -0.8 Kg/m2

PACKING

20 Kg Craft Bag

STORAGE